Rosslare HLX-40B Spécifications télécharger pdf (Page 28)

Programming the HLX-40

28 HLX-40 Installer Manual

5. Programming the HLX-40

5.1 Overview

We recommend that you program HLX-40 before installing it. The system must

be connected to the AC power supply for programming; you may also connect

the backup battery at this time.

HLX-40 is provided with two default codes:

 Default installer code: 8888 – Enables you to program HLX-40

 Default Master code: 1234 – Enables you to change the master code and

modify the User and Master options

We recommend that you change the master and installer codes after first time

use.

5.2 Enrolling Wireless Devices and Remote Controls

You can enroll detectors, remote controls, keypads, sirens, and repeaters.

Enrolling is not available for Wired Zone #40. It can only be enabled or disabled

(default: disabled). Zone 40 uses the wired zone and tamper inputs.

Before enrolling wireless devices and remote controls, make sure they all

contain the appropriate batteries.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 67 68

Pas de commentaire

Rosslare HLX-40B Spécifications Page 28