Rosslare AC-020 Manuel d'installation télécharger pdf (Page 8)

Mounting Instructions

Swipe Family Readers Installation Manual Page 8

4 Mounting Instructions

Prior to starting, select the location where the controller unit is

to be mounted. Use the supplied drilling template to assist in

locating and drilling the appropriate holes.

AY-B1663

AY-B4663

Figure 4: Mounting orientations

Note:

Be sure to protect the swipe sensor when the Reader is

mounted outside.

To mount the Reader:

1. Determine an approximate surface location for the

Reader.

2. Peel off the back of the self-adhesive mounting label

template and place it on the required mounting location.

3. Using the template as a guide, drill two holes (of the size

indicated on the template) on the surface to mount the

Reader.

4. Insert a suitable wall plug into each hole.

5. Drill a 7/16” (10 mm) hole for the cable. If the surface is

metal, place a grommet or electrical tape around the

edge of the hole.

6. Unscrew and remove the case security screw at the

bottom using the security hex key.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Pas de commentaire

Rosslare AC-020 Manuel d'installation Page 8