Rosslare AC-020 Guide de l'utilisateur télécharger pdf (Page 35)

AC-020 Page 35 03/02

NOTE: You must be in NORMAL mode to

program the AC-020. DOOR 1 / DOOR 2

LED will be green.

Wrong or timed out entries will reset the

controller to the NORMAL mode

condition.

To exit programming, press the “*/#” key

for two seconds. Three beeps are

generated and the system will return to

NORMAL mode. A short press on the

“*/#” key will also return the system to

NORMAL mode, and a long beep will be

heard. This aborts the programming, but

in some cases, such as Program

Function #7, data may have already

been programmed.

Wrong entries during programming may

also abort programming, along with long

beep generation.

All programming operations are done

either from the on-board keyboard or

from the reader. Programming the

PROX. employee codes requires using

proximity reader and proximity cards.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 69 70

Pas de commentaire

Rosslare AC-020 Guide de l'utilisateur Page 35