Rosslare AC-020 Guide de l'utilisateur télécharger pdf (Page 36)

Entering Programming Mode

To begin programming the controller’s settings,

the AC-020 must first place into Programming

Mode. You may only enter Programming mode

from Normal mode, the controller does not permit

entry to Programming Mode if the controller is in

Bypass and Secure Mode.

1) Press the “*/#” key for 2 seconds

• The DOOR 1 LED

will turn red

DOOR 1 DOOR 2

RED

2) Enter the Programming Code. The factory

default Programming Code is 1234 for Door

1 and 4321 for Door 2.

If the Programming Code is valid the

controller will be in Programming Mode.

• The DOOR 1 LED

will turn green

DOOR 1 DOOR 2

GREEN

AC-020 Page 36 03/02

If the Programming Code is NOT valid the

controller will emit a loud beep and will NOT

enter Programming Mode.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 69 70

Commentaires sur ces manuels

Pas de commentaire