Rosslare AC-G43 Manuel d'instructions télécharger pdf (Page 11)

Installation

AC-F4x and AC-G4x Family Manual Page 10

6) Once wired, replace the controller back onto its back plate

and secure using tamper-proof screw and special tool,

supplied with the hardware.

2.2 WIRING THE CONTROLLER

The controllers are provided with a one-meter, pre-wired, 10-

conductor 18 AWG cable

Wire according to the following steps:

1) Cut and strip the conductors to the necessary length.

2) Splice the controller pigtail wires to the corresponding

ancillary devices and insulate each connection, including

unused wires. Refer to the wiring color guide table and to the

wiring diagrams, depending on the desired application:

Wiring the Lock Strike Relay & REX (Figure 3)

Wiring for Auxiliary Input & Output (Figure 4)

Wiring for the BL-D40 External Sounder (Figure 5)

Wiring Color Guide

Color Description

Red V input

Black Ground

Green REX / BL

White In / Monitor

Purple Lock: Com

Gray Lock: N.O.

Brown Lock: N.C.

Blue Aux: Com

Yellow Aux: N.O.

Orange Aux: N.C.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Pas de commentaire

Rosslare AC-G43 Manuel d'instructions Page 11