Rosslare AC-G43 Manuel d'instructions télécharger pdf (Page 37)

Programming

AC-F4x and AC-G4x Family Manual Page 36

4.9 SETTING THE LOCKOUT FEATURE

In case the controller is presented with wrong codes, (PIN or Card)

consecutively several times the unit goes into lockout mode.

When a lockout occurs, the controller keypad and reader are

locked so no codes can be entered until the set lockout period

expires.

During Lockout, Mode LED is Off, Door LED flashes Red, and the

controller beeps every two seconds.

The default setting for the Lockout Feature is 4000 (Lockout

Disabled)

Note:

Using the lockout feature is highly recommended, especially

when selecting to use short PIN code length (4 or 5 digits).

1) Enter the programming mode.

2) Depress 6 to enter Menu 6.

• The Mode indicator will flash green.

3) Construct a code using the following

instructions:

Set the number of wrong code

attempts, which will cause Lockout

between 0 and 9 attempts.

Sets the Duration of the lockout,

between 00 and 99, the value is

multiplied by ten, resulting in 0-990

seconds

4 ? ? ?

Mode

Door

Green

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Pas de commentaire

Rosslare AC-G43 Manuel d'instructions Page 37