Rosslare AC-Q41H Manuel d'instructions télécharger pdf (Page 42)

Programming

4.9 KEYPAD HEATER OPERATION

⌦

NOT APPLICABLE FOR AC-Q44 (without keypad heater)

The controllers contain a built-in keypad heater. Once the heater

circuitry is activated, the heater will turn on when the ambient

temperature drops to 4±1°C and will remain on until the keypad

temperature rises to 7(+2 or -1)°C.

When the heater is on, the controller can operate down to an

ambient temperature of -20°C. When the heater is disabled, the

lowest operating temperature is 0°C.

The default setting for the keypad heater is disabled state (3000).

1) Enter the programming mode.

2) Depress 6 to enter Menu 6.

Mode

Door

Green

• The Mode indicator will flash green.

3) Construct a code using the following

instructions:

To disable the heater, the fourth digit is set to 0.

To enable the heater, the fourth digit is set to 1.

3 0 0 ?

4.10 SETTING THE LOCKOUT FEATURE

In case the controller is presented with wrong codes, (PIN or Card)

consecutively several times the unit goes into lockout mode.

When a lockout occurs, the controller keypad and reader are

locked so no codes can be entered until the set lockout period

expires.

Page 41 AC-Q4x Family, Installation and user Manual

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 57 58

Pas de commentaire

Rosslare AC-Q41H Manuel d'instructions Page 42